Pool Construction


The Aqua Dream Pools Construction Process:

Aqua Dream Pools is committed to building you a quality swimming pool that will bring you years of pleasure and†add to the value of your home. That’s why we’ve created this rigorous swimming pool construction process. We are†proud of our product and our company operations, and strive to be the most professional company in†the industry.

Pre-Construction Site Survey

Before starting the construction of your pool, we will schedule a pre-construction site survey. With you†present, our site supervisor will perform the survey and review the plans your designer has created for†you. We’ll inspect your yard to ensure no modifications to the design are required. We will paint a layout†of your pool in the yard and place Aqua Dream Pools Pools sign in your yard to help our crews find your†job site easily.


1.Layout and Dig
Beginning swimming pool construction

Average time 1-2 days

In this first phase of construction, the basic shape of your pools shell is painted on the ground in your†yard, the hole is dug, and excess dirt is removed. The hole will be slightly larger and deeper than the†finished pool, as the pool shell wall and bottom will take up some of this area.

2. Pre-Plumbing/Interior Plumbing Installation
swimming pool plumbing

Average time 5-7 days

It’s now time for the installation of all interior/underground plumbing. We will dig trenches as necessary†and place high-grade NSF (National Sanitation Foundation) approved Schedule 40 PVC pipe and†fittings in place. For the time being, they will be stubbed out, for completion after the shotcrete†phase is complete.

3. Steel and Inspection
swimming pool construction: steel rebar

Average time 2-3 days

After your pool has been dug, we will line the hole with reinforcing “steel rebar” to add the strengths†required for your pools Gunite shell. We will attach a ground wire to this steel for later use in grounding†your pool equipment. After installing the steel rebar, we will notify your municipality that the job is ready for a steel-and-ground inspection. An inspector will review your pool plans and inspect the job site to make sure†everything is up to code. We will then schedule the Shotcrete phase.

4. Gunite
swimming pool construction: the Gunite Phase

Average time: 1 day.

Gunite is a mixture of sand and cement forced dry through a hose under tremendous pressure. Water is†then added at the end of the hose at a controlled amount of 17% so the complete pool is of the exact†consistency to eliminate the potential of cold joints and cracking. Aqua Dream Pools†considers this†method true gunite. There is no higher quality material for the shell of any pool. Our crews will pneumatically apply the concrete that makes up your pools shell and steps. If your pool†design includes any swim-outs, fountains, those elements will be part of this phase as well.

Gunite Trimming
swimming pool construction: Gunite Trimming

5. Post-Gunite Cleanup

Average time: 1 day.

Our crews will remove the forms used to shape your pool, and haul away any trash that is left in the†area.

6. Equipment
swimming pool construction: Swimming Pool Equipment

Average time depending on inspections/weather: 3 to 5 days.

Our plumbing crews will install your pool pump, filter, and gas heater (if part of your pool design), and¬†dig trenches to lay pipe from your pool to the pool equipment. Any pipes for water features such as†sprays, fountains, or rock falls will be installed, along with pool return lines and skimmer(s). While our†tile crews install the actual skimmer, our start-up crews will install heads for any water features in your†design during later construction. We also run the conduit used for your pools lighting system and install lights and light fibers if your pool†has fiber-optic lighting. In accordance with your municipality, there will also be a series of inspections.

7. Tile and Coping
swimming pool construction: Tile and Coping

Average time depends on scope of work and delays: 7 to 14 days. Our tile crews will install your pools waterline tile and skimmer(s). Additional work may also be†performed during this phase by a different set of crews if rock is used in your pools design. If your pool design includes a rock waterfall that is inside the pool, this can be installed after the tile has†been installed, and completed prior to the deck phase. If your pool design requires a retaining wall at the edge of any part of your deck, it will be constructed at this time. If your design includes a turn-down wall, it will be poured as part of the deck fabrication.

8. Electric
Swimming Pool Electrical System Installation

Average time depends on scope of work and delays: 1 to 3 days. Our electric crews will run the conduit for the main electric supply used by your pool equipment. They†will also install lighting and any wiring necessary for your pool. This step often occurs in parallel with†tile and copings and/or deck installation.

9. Deck Installation
Pool Decking and Hardscape Pool Construction

Average time 5-7 Days. Your pool design may include may include any number of different deck materials. Additionally, each†municipality has its own requirements for deck inspections, including termite treatments, forming†inspections, etc. If your pool design requires a retaining wall at the edge of any part of your deck, we will†install it BEFORE constructing your deck.Our crews will form the shape of your deck and any planter areas, then run any drains included in your†pools design. Any steel required by your municipality will be set and connected to the ground wires†attached to your shells steel. After the deck is formed, we will notify your municipality so they can inspect the deck, if required. Once any inspections have been passed, we will schedule the pouring of your decks concrete. Once the†concrete has been poured, we will apply your chosen rock or tile finish to the concrete deck.

10. Safety Protection Inspection

(Must pass before we can add the interior finish.)

Before applying the interior finish to your pool and filling it with water, you must have the appropriate†alarms and/or fences in place, in accordance with building codes set forth by your municipality. We will†inspect the pool area to ensure the barrier protection is up to code.

11. Interior Finish

Swimming Pool Construction Process Interior Finish

Average time depending on finish: 1-3 days. In this stage, we will carefully prepare the concrete surface of your swimming pool, and then apply your†pools finish and fill the pool with water. Your finish will actually take several weeks to cure, even though†you will be able to swim sooner than that.

12. Start-Up

After the pool is full of water, one of our technicians will put the necessary chemicals in the water to help†achieve the best possible finish for your pool. We will also install any special features such as spray†heads, fountains, or computer controls at this time. This also starts the 30 day period where we will maintain your brand-new swimming pool for you. Meanwhile, an inspector from your municipality will ensure that the pool is operating properly and safe†for use.

13. Clean-Up

During this phase, we remove any trash that was created during the construction of your pool, and also†complete the final grade of your yard.

14. Pool School

In this step, one of our technicians will show you how to use the features of your pool and equipment, and how to care for and maintain your pool.

15. Final Inspection

In most communities, an inspector from your municipality will inspect your pool area to ensure it is safe†to use and everything has been properly completed.